S2 FFP3/N99 filters
£13.00 incl VAT
To make sure you’re protected, you should always use your mask with a filter, and dispose of the filter after use.
The filters are currently being tested by SGS labs to confirm filtration of 99.9% of particles larger than 6 nanometers.
Covid-19 is approximately 6 nanometer, therefore our filters keep you protected.
Facemasks with filters larger than 6 nanometers, are useless in the fight against Covid-19.
These masks are not sold as medical devices and are not a replacement for surgical or procedural masks. Though, the breathable face shield is made with medical-grade, FDA and LFGB approved silicone. Fitted with a filter, your mask will help fight the spread of COVID-19. MoD’s S2 mask is designed in Amsterdam, over 10,000 customers globally are now using the S2 to protect themselves and their loved ones. This is a general-purpose filter and provides general-purpose protection. MoD is not a medical device manufacturer. This product is not intended to diagnose, treat, cure any disease. MoD’s filters pass the following test standards, with specific results listed below:
YY/T 0969-2013: BFE 99.7% filter efficiency
GB/T 32610-2016: PFE 98.6% filter efficiency for 1 layer (we are using 3 electrostatic layers)
GB2626: >99.97% at 0.3 microns
Activated Carbon 2.5pm filter
Our filters have been designed to the same standards as FFP3/N99 Filters. This means we filter out all particles that are 6nm and larger. MoD’s filters pass the following test standards, with specific results listed below:
- YY/T 0969-2013: BFE 99.7% filter efficiency
- GB/T 32610-2016: PFE 98.6% filter efficiency for 1 layer (we are using 3 electrostatic layers)
- GB2626: >99.97% at 0.3 microns
- Activated Carbon 2.5pm filter